Toyota Aygo Club Knowledgebase

How to change the Rear Number Plate Lights

Step 1

This is how it all looks with the standard filament bulbs in place: -

Step 2

First up you insert the screwdriver's flat head into the square hole you see there

Step 3

Then holding it like in the pic below, you rotate the lens assembly anti-clockwise (rotate the lens toward you, if you're holding it like i am in the pic below)

Step 4

And here's the old bulb, just simply pull it out...

Step 5

...And replace it with the new bulb

Note

Make sure you align the "lugs" on the bulb holder to the holes on the lens assembly like below: -

Step 6

Re-attach holder to the lens assembly and rotate clockwise until it clicks in and then fit the number plate light back into the bumper in the same way you fit the interior light assembly in my last write up

Step 7

Admire your handy work!

non given

Submitted by: Paul Gi

<< Return to the Aygo Knowledgebase